Land Ruler

How much material do you need?

Enter the area and layer depth. See the volume and bags to prepare.

Area × layer depth

Your material calculation

L

Use one decimal point or comma, without thousands separators. Leave bag volume empty for a volume-only estimate.

Measure area on the map

Illustrative cutaway garden with layers of soil, gravel and sand. The image does not depict the location or scale of your area.Illustrative material layers

Example values, explained

50 m² × 0.1 m = 5 m³

Measure the area firstTrace the boundary on the map, then enter its area here.

How material volume is calculated

Multiply the area to cover by the desired layer depth, using metres for both dimensions. The calculator converts your selected area and depth units, then displays cubic metres and litres. The example uses 50 m² and 10 cm: 50 × 0.1 = 5 m³, or 5,000 litres.

Choose a bag volume for a bag estimate

If the product is sold by volume, enter the litres printed on the bag. The required volume is divided by this value and rounded upward to whole bags. Five cubic metres in 50-litre bags requires 100 bags. Leave this input empty when ordering loose material by volume.

Plan any allowances separately

The soil, gravel and sand options change the material label, not the volume formula. Compaction, settling, delivery losses and spare material are not added automatically. Use a layer depth and allowance suitable for the product and job. Weight is not calculated because the material density is not supplied.

Check centimetres, metres and inches before ordering

Keep the entered number paired with its unit. For example, 10 cm is 0.1 m; entering 10 m instead would make the volume 100 times larger. The depths below illustrate conversion, not a recommended layer specification.

Volume checks for the same 12 m² area
Entered depthDepth in metresVolumeLitres
1 cm0.01 m0.12 m³120 L
5 cm0.05 m0.6 m³600 L
10 cm0.1 m1.2 m³1,200 L
2 in0.0508 m0.6096 m³609.6 L

The inch conversion uses 1 in = 0.0254 m. NIST: SI conversion factors.

Measure an L-shaped garden without counting the same ground twice

Split the outline into non-overlapping rectangles, then subtract any part that will not receive the material. A worked area check is:

  1. First rectangle: 4 m × 3 m = 12 m².
  2. Second rectangle: 5 m × 2 m = 10 m².
  3. Subtract a 2 m² existing path: 12 + 10 − 2 = 20 m² to cover.

For a chosen 5 cm layer, enter 20 m² and 5 cm: 20 × 0.05 = 1 m³, or 1,000 L. If sections use different materials or depths, calculate each combination separately and keep those order quantities separate.

See two methods for calculating an L-shaped area.

Compare a bulk order with whole bags

Suppose the usable area is 22 m² and the chosen depth is 7 cm. The volume is 22 × 0.07 = 1.54 m³ = 1,540 L. The same requirement can be checked against two ways of buying the product:

By volume

1.54 m³

Use this volume when discussing a loose-material order with the supplier.

In 40 L bags

39 whole bags

1,540 ÷ 40 = 38.5, rounded up to 39 bags.

Volume in those bags

1,560 L

39 × 40 L leaves 20 L beyond the calculated requirement.

That 20 L is caused only by rounding to whole bags. It is not a compaction, settlement or waste allowance. Use the volume printed on the actual product packaging.

What to ask when a supplier quotes tonnes

A 1.54 m³ result does not determine a mass by itself. Ask for the product-specific bulk density and the condition to which that value applies. For soil, bulk volume includes pore space as well as solid particles, as explained by USDA NRCS: Bulk Density.

Metric tonnes = volume in m³ × bulk density in kg/m³ ÷ 1,000

Use a density for the material being ordered, rather than the density of its solid particles. No density is assumed or applied by this calculator. The mass–volume relation is ρ = m / V; NIST defines density and its kg/m³ unit.

Questions about material quantities

Can this tell me the weight in tonnes?

No. Converting volume into mass requires the actual bulk density, which varies with material and moisture. This tool reports volume and volume-based bags.

Can I enter inches or an area in acres?

Yes. Depth supports centimetres, metres and inches. Area supports square metres, hectares, decares, international acres and square feet.

Does the map fill in my area automatically?

The map link opens the existing area tool. Measure there and enter the area here; this page does not import a boundary automatically.

Can I enter a 25 kg bag as 25 in the bag-volume field?

No. This field is in litres. A 25 kg mass is not a 25 L volume. Use a volume stated for that bag or obtain a suitable volume/density specification from the supplier.

Should I add all the layers into one depth?

Calculate separate materials separately. For example, a soil layer and a gravel layer need their own area × depth calculation and their own order quantities. Add volumes only when they refer to the same product.