Land Ruler

Measurement tool

Area unit conversion

Convert square metres, hectares and acres

Already know the area? Convert the number directly without drawing another boundary. Choose the starting unit and the unit you need; this tool converts area, not length or perimeter.

The same hectare shown as 10,000 square metres and ten groups of 1,000 square metres.
Changing the unit changes the number used to express the area, not the size of the land.

Area unit converter

Use a decimal point, for example 1.5. Do not enter thousands separators, commas, spaces or exponents. Enter one thousand as 1000.

Results are rounded to at most 12 significant digits for display. Swap uses the full calculation value, not the rounded display text.

Area units expressed in square metres

To convert an area, multiply by the starting unit’s square-metre factor, then divide by the target unit’s factor. These are the definitions used by this converter.

Area conversion reference table
Starting unitEquivalent square metres (m²)
1 m²1
1 km²1,000,000
1 hectare10,000
1 decare1,000
1 acre4,046.8564224
1 ft²0.09290304
1 yd²0.83612736

The acre, ft² and yd² factors use the international foot and yard definitions. One decare equals 1,000 m².

Worked examples

Two international acres equal 8,093.7128448 square metres, rounded here to 8,093.71.
Worked example: 2 acres = 8,093.7128448 m², or about 8,093.71 m². Keep full precision until the final display.

Square metres to hectares

15,000 m² ÷ 10,000 = 1.5 hectares. The same area is 15 decares. Changing the unit changes the number, not the size of the land.

Acres to square metres

2 acres × 4,046.8564224 = 8,093.7128448 m², or about 8,093.71 m² when rounded to two decimal places.

Choose the original unit before converting

A hectare split into square metres and groups of one thousand square metres.
Select the unit belonging to your original value, then choose the target unit. Area and perimeter use different units.
  1. Enter the area value using digits and an optional decimal point.
  2. Choose the unit attached to that original number, then choose the target unit.
  3. Select Convert area and read both units with the result.
  4. Select Swap units and result to use the converted value as the new input and calculate in the other direction.

Calculations use the unit definitions below and ordinary floating-point arithmetic. Very large or very small values that cannot be represented produce an error rather than an infinite or silently zero result.

Area conversion questions

Can I convert a perimeter in metres to square metres?

No. Perimeter measures length around an edge, while area measures the surface inside it. You need the shape and dimensions or a traced boundary to calculate area; changing units cannot supply that information.

Why are commas not accepted in the input?

This English form uses a dot as the decimal separator and no thousands separators. Type 15000 instead of 15,000, and 1.5 for one and a half. Grouping may appear in the formatted result, but it is not accepted in the input.

How many square metres are in one decare?

One decare equals 1,000 m². Ten decares equal one hectare.

Does converting units improve a map measurement?

No. A conversion changes the unit only. The original estimate still depends on the map, boundary definition and point placement; extra decimal places do not make it more accurate.

Use the map area calculator to trace a visible land boundary, or read our land area measurement guide before placing points.

A circular area

The radius calculator estimates a circle defined by a centre and radius.

A line or path

Use the distance calculator for length, or browse all measurement tools.