Land Ruler

How much water is that?

Enter the area and your chosen water depth. See the volume in litres and cubic metres.

User-entered water depth

Your water volume calculation

Use a decimal point or comma, without thousands separators.

Measure area on the map

Illustrative isometric garden being watered. The illustration does not describe actual rainfall or the area you enter.100 m²Illustrative irrigation scene

Area and water depth calculation

100 m² × 10 mm = 1,000 L

Measure the area to waterMeasure the usable area on the map, then enter it here.

How the volume is calculated

One millimetre of water over one square metre has a volume of one litre. Multiply the area in square metres by the depth in millimetres to find litres. Divide litres by 1,000 for cubic metres. For example, 100 m² × 10 mm gives 1,000 litres, or 1 m³.

Choose the depth for your own plan

The 10 mm value is an editable example. This calculator converts a depth into a volume; it does not decide how much water a plant, lawn or crop needs. Enter a depth appropriate to your plan.

What the volume includes

The result is the volume corresponding to the entered area and depth. Rainfall, evaporation, runoff, delivery losses, application efficiency and irrigation time are not calculated automatically. Include any allowance when choosing your input depth.

Irrigation water questions

Can I enter inches instead of millimetres?

Yes. One inch equals 25.4 mm. The formula converts the selected depth to millimetres before calculating litres.

Can this tell me how long to run a sprinkler?

Not from area and depth alone. Runtime also requires the actual flow delivered by your system; this calculator reports water volume.

What happens if I enter a depth of zero?

The result is zero litres and zero cubic metres. The area must still be greater than zero.